Hyundai Venue (QX): Automatic Transaxle Control System / Output Speed Sensor. Specifications
| Specifications |
|
Items |
Specifications |
|
|
Operation condition [°C(°F)] |
(-40 to 150) -40 to 302 |
|
|
Output voltage(V) |
High |
1.18 - 1.68 |
|
Low |
0.59 - 0.84 |
|
Description The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM.
Removal • When Diagnostic Trouble Codes (DTC) is on, perform the following procedure to replace it.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: ESCL(Electronic Steering Column Lock). Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shrouds.
Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Rear Seat Assembly. Repair procedures
- Instrument Cluster
- Body (Interior and Exterior)
- New on site
- Most important about car
