Hyundai Venue: Engine Control System / Purge Control Solenoid Valve (PCSV). Schematic diagrams
Hyundai Venue (QX) (2020-2025) Service Manual / Engine Control / Fuel System / Engine Control System / Purge Control Solenoid Valve (PCSV). Schematic diagrams
| Circuit Diagram |
[M/T]
[A/T]
Harness Connector
Purge Control Solenoid Valve (PCSV). Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect PCSV connector.
3.
Measure resistance between PCSV terminals 1 and 2...
Other information:
Hyundai Venue (QX) (2020-2025) Owners Manual: System Malfunction
Check Forward Collision-Avoidance Assist system When FCA is not working properly, FCA warning light () will illuminate and the warning message will appear for a few seconds. After the message disappears, the master warning light () will illuminate...
Hyundai Venue (QX) (2020-2025) Service Manual: Specifications
Specification Item Specification Rated voltage 12V, 0.9 kW The number of pinion teeth 10 Performance [No-load, 11.5V] Ampere Max...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Remote start
- Remote Key
- Theft-Alarm System
- New on site
- Most important about car
Air bag collision sensors
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:
Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.
Copyright © 2025 www.hvenueqx.com