
The air intake control button is used to select either Fresh mode (outside air) or Recirculation mode (cabin air).
Recirculation mode

When Recirculation mode is selected, air from the passenger compartment will be recirculated through the system and heated or cooled according to the function selected.
Fresh mode

When Fresh mode is selected, air enters the vehicle from outside and is heated or cooled according to the function selected.
Information
Using the system primarily in Fresh mode and Recirculation mode only when needed is recommended for best results.
Prolonged operation of the heater in Recirculation mode and without the A/C ON can cause fogging of the windshield.
In addition, prolonged use of the A/C ON in Recirculation mode may result in excessively dry, dehumidified air in the cabin.
WARNING
The temperature will increase by turning the knob to the right. The temperature will decrease by turning the knob to the left.
Turn the knob to the right to increase the fan speed and airflow. Turn the knob to the left to decrease fan speed and airflow. Setting the fan speed control knob to the “0” position turns off the fan.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shroud panel.
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.