| Components Location |

| 1. Automatic transaxle 2. Drain plug gasket 3. Drain plug 4. ATF level check plug |
5. ATF level check plug gasket 6. ATF injection plug O-Ring 7. ATF injection plug (Eyebolt) |
Removal 1. Turn OFF ignition switch and disconnect the negative (-) battery cable. 2. Remove the air cleaner and air duct.
Service Adjustment Procedure Automatic Transaxle Fluid (ATF) Level Check • When checking the oil level, be careful not to enter dust, foreign matters, etc.
Instructions (R-134a) When Handling Refrigerant 1. R-134a liquid refrigerant is highly volatile. A drop on the skin of your hand could result in localized frostbite. When handling the refrigerant, be sure to wear gloves.
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater unit assembly. (Refer to Heater - "Heater Unit") 3. Separate the evaporator temperature sensor connector (A), loosen the mounting screws and remove the eva