Hyundai Venue (QX): Engine Control System / Camshaft Position Sensor (CMPS). Description and operation
Hyundai Venue (QX) (2020-2026) Service Manual / Engine Control / Fuel System / Engine Control System / Camshaft Position Sensor (CMPS). Description and operation
| Description |
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position
by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the piston
position of each cylinder which the CKPS can't detect.
The CMPS is installed on engine head cover and uses a target wheel installed
on the camshaft. This sensor has a hall-effect IC which output voltage changes
when magnetic field is made on the IC with current flow.
Inspection Wave Form 1. Check signal waveform of CKPS and CMPS using a diagnostic tool. Specification : Refer to "DTC Guide" Coil Resistance 1.
Singal Waveform
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Components and components location
Hyundai Venue (QX) (2020-2026) Service Manual: Intake Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Rear Seats
- Engine Coolant
- Maintenance
- New on site
- Most important about car
Copyright В© 2026 www.hvenueqx.com - 0.0147