| Component Location |

| 1. Driver power window main switch 2. Assist power window main switch 3. ICU junction block 4. Door lock knob 5. Tailgate lock actuator |
6. Door lock actuator 7. Door lock/unlock switch 8. Rear power window LH switch 9. Rear power window RH switch |
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. (Refer to Body - "Front Door Trim") 2.
Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model.
Removal Precautions for using the plastic pulley • Be careful not to place the pulley to downwards of the floor or table.