Hyundai Venue (QX): Rear Wiper/Washer / Components and components location
| Component Location |
| 1. Rear wiper arm nut 2. Rear wiper arm & blade 3. Rear wiper motor assembly |
3. Rear wiper motor assembly
nut 5. Rear wiper grommet |
Inspection Rear Wiper Motor 1. Remove the connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Ambient Temperature Sensor. Description and operation
Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Hyundai Venue (QX) (2020-2026) Service Manual: PTC Heater. Repair procedures
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Brake System
- Remote Key
- Child-Protector Rear Door Locks
- New on site
- Most important about car
