Hyundai Venue (QX): Automatic Transaxle / Components and components location

Hyundai Venue (QX) (2020-2026) Service Manual / Automatic Transaxle System\ / Automatic Transaxle / Components and components location

Components Location(1)

Hyundai Venue. Components and components location

1. Automatic transaxle assembly
2. ATF cooler tube
3. Ground line
4. Shift cable mounting bracket
5. Shift cable
6. Inhibitor switch & manual control lever
 7. Mounting bracket cover
8. Support bracket mounting bolt
9. Automatic transaxle mounting bracket
10. ATF cooler hose
11. ATF cooler & radiator

Components Location(2)

Hyundai Venue. Components and components location

1. Automatic transaxle assembly
2. Subframe assembly
 3. Roll rod support bracket
4. Roll rod bracket

    Removal 1. Turn OFF ignition switch and disconnect the negative (-) battery cable. 2. Remove the air cleaner and air duct.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Receiver-Drier. Repair procedures

    Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.

    Hyundai Venue (QX) (2020-2026) Service Manual: In-car Sensor. Description and operation

    Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accord

    Categories

     
    Copyright В© 2026 www.hvenueqx.com - 0.0155