| Components |

| 1. Resister 2. Cooling fan 3. Cooling fan motor |
4. Cooling fan shroud 5. Reservoir tank |
Replacement and Air Bleeding • Never remove the radiator cap when the engine is hot.
Removal and Installation Cooling Fan Assembly 1. Disconnect the battery negative terminal. 2. Remove the air duct.
Inspection • Before measuring the pressure of the refriferant line, check whether the refrigerant amount is charged in accordance with the specified charging amount.
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater unit assembly. (Refer to Heater - "Heater Unit") 3. Separate the evaporator temperature sensor connector (A), loosen the mounting screws and remove the eva