Hyundai Venue (QX): Ignition Lock Switch / Description and operation
| Description |
| – |
Ignition lock switch is mounted on the clutch pedal.
|
| – |
Ignition lock switch is operated when you press the clutch pedal.
|
| – |
If the clutch pedal is not pressed down, the engine is not started.
|
| Ignition lock & clutch switch operating locus |
| – |
If the clutch pedal is pressed down, (B) operate ignition lock switch
at a location.
|
|||||||||||
Specifications Item Specifications Working voltage DC 12.5V ± 0.3V Operating force Initial position : 0.
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Condenser. Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Hyundai Venue (QX) (2020-2026) Service Manual: Photo Sensor. Description and operation
Description The photo sensor is located at the center of the defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion to the amount of radiation received which is transferred to th
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Rear Seat Assembly. Repair procedures
- Trip Computer
- Tire Pressure Monitoring System (TPMS) (Type A)
- New on site
- Most important about car
