| Description |
| • |
Engine coolant is used for circulating heat in order to heat and cool
the transaxle oil.
|
| • |
Prevents over heating of the transaxle oil while the vehicle is moving.
â–¶ Flow of the coolant
|
Repair procedures • ATF cooler is a unit with the radiator, so refer to radiator removal/installation procedures in the engine section.
Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.