Hyundai Venue (QX): Engine And Transmission Assembly / Engine Room Under Cover. Repair procedures

Removal and Installation
1.
Remove the engine room under cover (A).
Tightening torque :
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)

Hyundai Venue. Engine Room Under Cover. Repair procedures

2.
Installation is reverse order of removal.

    Removal and Installation 1. Remove the engine cover (A). 2. Installation is reverse order of removal

    Components 1. Engine mounting bracket 2. Engine mounting support bracket 3. Roll road bracket 4. Transaxle mounting bracket

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: In-car Sensor. Repair procedures

    Diagnosis With GDS 1. The heating, ventilation and air conditioning can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). ※ The diagnostic system (GDS) provides the following information.

    Hyundai Venue (QX) (2020-2026) Service Manual: Evaporator Core. Repair procedures

    Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater unit assembly. (Refer to Heater - "Heater Unit") 3. Separate the evaporator temperature sensor connector (A), loosen the mounting screws and remove the eva

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.025