Hyundai Venue (QX): Engine Mechanical System / Engine And Transmission Assembly
- Engine Cover. Repair procedures
- Engine Room Under Cover. Repair procedures
- Engine Mounting. Components and components location
- Engine Mounting. Repair procedures
- Engine And Transmission Assembly. Repair procedures
Special Service Tools Tool (Number and name) Illustration Use Crankshaft front oil seal installer (09455-21200) Installation of the front oil seal Valve stem oil seal installer (09222-2B100) Installation of the valve stem oil seal Valve spring compressor and holder A : (09222-3K000) B : (09222-3K100) Removal and installation of the intake or exhaust valve Crankshaft rear oil seal installer A : (09231-H1100) B : (09231-2B200) Installation of the crankshaft rear oil seal Ring gear stoppper A : (09231-3N100) B : (09231-2B100) Removal and installation of crankshaft pulley bolt.
Removal and Installation 1. Remove the engine cover (A). 2. Installation is reverse order of removal
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Troubleshooting
Troubleshooting Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compressor. Use the table below to help you find the cause of the problem.
Hyundai Venue (QX) (2020-2026) Service Manual: Intake Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Child-Protector Rear Door Locks
- Repair procedures
- Maintenance
- New on site
- Most important about car
