Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the crash pad lower panel.
Components 1. Caliper body 2. Caliper carrier 3. Pad inner shim 4. Brake pad 5. Pad retainer
Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.