Hyundai Venue (QX): Front Seat / Front Seat Shield Inner Cover. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Inner Cover. Repair procedures

Replacement
Hyundai Venue. Front Seat Shield Inner Cover. Repair procedures   
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Loosen the mounting screws and remove the front seat shield inner cover (A).

Hyundai Venue. Front Seat Shield Inner Cover. Repair procedures
3.
To install, reverse removal procedure.

    Component Location 1. Front seat shield inner cover

    Component Location 1. Front seat back cover

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: In-car Sensor. Description and operation

    Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accord

    Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.014