Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel.
Component Location 1. Head lamp leveling actuator(built in Head Lamp) 2. Head lamp leveling switch
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.