| Circuit diagram |

Component Location 1. Head lamp leveling actuator(built in Head Lamp) 2. Head lamp leveling switch
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel (A).
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.