| Description |
| 1. |
BI-FUNCTION
|
| 2. |
Static Bending Light (SBL)
|
Component Location 1. Head Lamp (Low, High) 2. DRL/Position lamp 3. Static bending light (SBL) 4. DRL & Position Lamp 5.
Removal Head lamps become very hot during use; do not touch them or any attaching hardware immediately after they have been turned off.
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.
Description Rear view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the AV monitor or the ECM (Reverse Display Room Mirror) mirror while backing-up.