Inspection Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position.
Specifications Items Bulb Type Bulb Wattage (W) Front Head lamp General (Low/High) 9005HL+ 55 / 60 Option (Low/High) 9005HL+ 60 Turn signal lamp PY21W 21 Static bending light (SBL) H7 55 DRL/Position lamp (General) PY21/5W 21/5 DRL/Position lamp (Option) LED LED Rear Rear combination lmap (General) Turn signal lamp PY21W 21 Stop / Tail lamp P21/ 5W 21/ 5 Rear combination lmap (Option) Stop/Tail lamp LED LED Turn signal lamp PY21W 21 High mounted stop lamp W16W 16 License plate lamp W5W 5 Overhead console lamp FESTOON 10 Room lamp FESTOON 8 Back up lamp W16W 16
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front view camera cover (A). 3. Separate the front view camera connector (A). 4.