| Specification |
|
Item |
Specification |
|
Resistance (MΩ) |
4.87 |
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking.
Circuit Diagram [M/T] [A/T] Harness Connector
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front view camera cover (A). 3. Separate the front view camera connector (A). 4.