Hyundai Venue (QX): Hydraulic System / Line Pressure Control Solenoid Valve (LINE_VFS). Specifications
| Specifications |
|
Shape |
Items |
Specifications |
|
|
Control current (voltage) [mA] |
0 - 850 |
|
Supply pressure [kpa (kgf/cm², psi)] |
539.36 (5.5, 78.23) |
|
|
Control pressure [kpa (kgf/cm², psi)] |
0 - 519.75 (0 - 5.3, 0 - 75.38) |
|
| Internal
resistance(Ω) |
4.8 - 5.4 |
Description • Line pressure control solenoid valve is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the line pressure.
Component Location (1)_Valve Body Cover 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector Component Location (2)_Solenoid Valve 1.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures
Removal 1. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 2. Loosen the mounting screws and remove the rear view camera. Installation 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Vehicle Information
- Battery. Specifications
- Engine Electrical System
- New on site
- Most important about car
