Hyundai Venue (QX): Hydraulic System / Line Pressure Control Solenoid Valve (LINE_VFS). Components and components location
| Component Location (1)_Valve Body Cover |
| 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector |
| Component Location (2)_Solenoid Valve |
| 1. 26 Brake Control Solenoid
Valve 2. 35R Clutch Control Solenoid Valve 3. Underdrive Brake Control Solenoid Valve 4. Overdrive Clutch Control Solenoid Valve 5. ON/OFF Solenoid Valve 6. Torque Converter Control Solenoid Valve (Damper Clutch Control Solenoid Valve) 7. Line Pressure Control Solenoid Valve 8. Support Bracket (Direct Control Solenoid Valve) 9. Support Bracket (Indirect Control Solenoid Valve) 10. Roller |
Specifications ▷ Control type : Normally high type Shape Items Specifications Control current (voltage) [mA] 0 - 850 Supply pressure [kpa (kgf/cm², psi)] 539.
Inspection • Refer to the DTC manual for the check procedure.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures
Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Hyundai Venue (QX) (2020-2026) Service Manual: Troubleshooting
Troubleshooting Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compressor. Use the table below to help you find the cause of the problem.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Liftgate
- Vehicle Information
- Automatic Transaxle Fluid (ATF). Repair procedures
- New on site
- Most important about car
