Hyundai Venue (QX): Hydraulic System / Line Pressure Control Solenoid Valve (LINE_VFS). Description and operation

Hyundai Venue (QX) (2020-2026) Service Manual / Automatic Transaxle System\ / Hydraulic System / Line Pressure Control Solenoid Valve (LINE_VFS). Description and operation

Description
•
Line pressure control solenoid valve is attached to the valve body.
•
This variable force solenoid valve indirectly controls the hydraulic pressure inside the line pressure.

Hyundai Venue. Line Pressure Control Solenoid Valve (LINE_VFS). Description and operation

    Inspection    • Refer to the DTC manual for the check procedure.

    Specifications ▷ Control type : Normally high type Shape Items Specifications Control current (voltage) [mA] 0 - 850 Supply pressure [kpa (kgf/cm², psi)] 539.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Intake Actuator. Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.

    Hyundai Venue (QX) (2020-2026) Service Manual: Description and operation

    Description Rear Corner Radar is a system that measures the relative speed and distance from the following vehicles by using two electromagnetic wave radar sensors attached to the rear bumper, and detects any vehicle within the blind spot zone and gives off alarm.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.011