Hyundai Venue (QX): Body Electrical System / Multifunction Switch
Removal 1. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 2. Disconnect the multifunction switch connector and then remove the low horn (A).
Specifications Items Specifications Rated voltage 12 V (Test Voltage : 5V ± 0.1V, Washer : 14V ± 0.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: In-car Sensor. Description and operation
Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accord
Hyundai Venue (QX) (2020-2026) Service Manual: Rear Corner Radar Unit. Repair procedures
Removal lf replacement of the rear corner radar unit bracket or extension wire is required, replace the defective part only with a new one. 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Instrument Cluster
- Normal Maintenance Schedule
- Electronic Stability Control (ESC)
- New on site
- Most important about car
