Hyundai Venue (QX): Horn / Repair procedures

Removal
1.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
2.
Disconnect the multifunction switch connector and then remove the low horn (A).

Hyundai Venue. Repair procedures

Installation
1.
Install the horns after connecting the horn connectors.
2.
Install the front bumper cover.

    Component Location 1. Horn switch 2. Horn relay 3. Horn 4. Clock spring

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Compressor. Description and operation

    Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperature refrigerant gas into high pressure and high temperature refrigerant gas.

    Hyundai Venue (QX) (2020-2026) Service Manual: PTC Heater. Repair procedures

    Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.

    Categories

     
    Copyright В© 2026 www.hvenueqx.com - 0.0196