| Circuit Diagram |

| Circuit Diagram |


Component Location 1. Power door mirror 2. Power door mirror control (LH/RH) 3. Power door mirror switch
INSPECTION 1. Remove the front left door trim. (Refer to Body - "Front Door Trim") 2.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.