Hyundai Venue (QX): Rear Bumper / Rear Bumper beam Assembly. Components and components location

Hyundai Venue (QX) (2020-2026) Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper beam Assembly. Components and components location

Component Location

Hyundai Venue. Rear Bumper beam Assembly. Components and components location

1. Rear bumper beam assembly


    Replacement    • Put on gloves to prevent hand injuries.

    Replacement    • Put on gloves to prevent hand injuries.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures

    Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.

    Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation

    Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0199