| Component Location |

| 1. Rear transverse trim |
Replacement [Center pillar lower trim] • Put on gloves to prevent hand injuries.
Replacement • Put on gloves to prevent hand injuries.
Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.