Hyundai Venue (QX): Automatic Transaxle Control System / Shift Lever. Components and components location

Hyundai Venue (QX) (2020-2025) Service Manual / Automatic Transaxle System\ / Automatic Transaxle Control System / Shift Lever. Components and components location

Components Location

Hyundai Venue. Shift Lever. Components and components location

1. Shift lever knob & boots
2. Shift lever assembly
3. Shift cable

4. Manual control lever
5. Shift cable retainer
6. Snap pin

❮Inhibitor Switch. Repair procedures

Inspection ▶ Inspection flow of the inhibitor switch ▶ Items to check 1. Inspect DTC code. 2.

Shift Lever. Repair procedures❯

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Pull the knob (A) in the direction of "F" and remove the knob.

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Blower Resistor (Manual). Repair procedures

Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.

Hyundai Venue (QX): Automatic Transaxle Control System / Shift Lever. Components and components location

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Blower Resistor (Manual). Repair procedures

Hyundai Venue (QX) (2020-2025) Service Manual: Description and operation

Categories