Hyundai Venue (QX): SRSCM / Side Impact Sensor (SIS). Description and operation

Hyundai Venue (QX) (2020-2026) Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS). Description and operation

Description
Side Impact Sensor (SIS) system consists of two SIS which are installed at each center pillar nearby (LH and RH).
Side Impact Sensor is also called A-SIS because it detects acceleration.
SRSCM decides deployment of the airbag and the time of deployment through the collision signal of the SIS when the collision occurred.

    Removal    • Removal of the airbag must be performed according to the precautions/ procedures described previously.

    Components 1. Side Impact Sensor (SIS)

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Evaporator Temperature Sensor. Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.

    Hyundai Venue (QX) (2020-2026) Service Manual: Evaporator Core. Repair procedures

    Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater unit assembly. (Refer to Heater - "Heater Unit") 3. Separate the evaporator temperature sensor connector (A), loosen the mounting screws and remove the eva

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0129