Hyundai Venue (QX): Manifold Absolute Pressure Sensor (MAPS) / Specifications
| Specification |
|
Pressure [kPa (kgf/cm², psi)] |
Output Voltage (V) |
|
20.0 (0.20, 2.9) |
0.79 |
|
46.7 (0.47, 6.77) |
1.84 |
|
101.3 (1.03, 14.7) |
4.00 |
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional to the pressure to the ECM.
Singal Waveform
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Heater Unit. Components and components location
Component Location 1. Heater unit assembly Compoents 1. Mode control actuator 2. Heater core case 3. Center duct seal 4. PTC heater 5. Heater core assembly 6. Heater case [LH] 7.
Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Remote start
- Vehicle Information
- Engine Coolant
- New on site
- Most important about car
