Hyundai Venue (QX): Manual Transaxle System / Specifications

Hyundai Venue (QX) (2020-2026) Service Manual / Manual Transaxle System / Specifications

Specifications
Transaxle type
M6CF1
Engine type
 Gasoline 1.6 MPI
Gear ratio
 1st
 3.769
2nd
 2.045
3rd
 1.370
4th
 1.036
5th
 0.794
6th
 0.688
Reverse
 3.700
Final gear ratio
 Tire (15 inch)
 4.267
Low octain/ high mountain & tire 15, 17 inch
 4.563

Tightening Torques
Items
N.m
kgf.m
lb-ft
Oil drain plug
 58.9 - 78.5
 6.0 - 8.0
 43.4 - 57.8
Oil filler plug
 58.9 - 78.5
 6.0 - 8.0
 43.4 - 57.8
Shift lever assembly bolt
 8.8 - 13.7
 0.9 - 1.4
 6.5 - 10.1
Control cable retainer
 11.8 - 14.7
 1.2 - 1.5
 8.7 - 10.8
Back up lamp switch
 39.2 - 58.8
 4.0 - 6.0
 28.9 - 43.4
Neutral swtich
 39.2 - 58.8
 4.0 - 6.0
 28.9 - 43.4
Control shaft complete
 19.6 - 26.5
 2.0 - 2.7
 14.5 - 19.5
Control cable bracket
14.7 - 21.6
 1.5 - 2.2
 10.9 - 15.9
Transaxle bracket mounting bolt
 88.3 - 107.9
 9.0 - 11.0
 65.1 - 79.8
Transaxle support bracket mounting bolt
 58.9 - 78.5
 6.0 - 8.0
 43.4 - 57.8
Roll rod bracket bolt
 49.0 - 63.7
 5.0 - 6.5
 36.2 - 47.0
107.9 - 127.5
 11.0 - 13.0
 79.6 - 94.1
Roll rod support bracket bolt
 49.0 - 68.6
5.0 - 7.0
 36.2 - 50.6
Start motor mounting bolt
 49.0 - 63.7
 5.0 - 6.5
 36.2 - 47.0
Transaxle upper mounting bolt (TM=>ENG)
 42.2 - 53.9
 4.3 - 5.5
 31.1 - 39.8
Transaxle lower mounting bolt (ENG=>TM)
 42.2 - 48.1
 4.3 - 4.9
 31.1 - 35.4
42.2 - 53.9
 4.3 - 5.5
 31.1 - 39.8

Lubricants
Items
Recommnend lubricant
Quantity
Transaxle gear oil
 API Service GL-4, SAE 70W
• Recommended oil
–
SHELL : SPIRAX S6 GHME 70W MTF
–
SK : HK SYN MTF 70W
–
GS CALTEX : GS MTF HD 70W
1.5 - 1.6 L
(0.40 -0.42 U.S.gal., 1.58 - 1.69 U.S.qt., 1.32- 1.40 lmp qt.)

Sealant
Items
Specified sealant
Control shaft assembly
 MS721-40 or MS721-38

    Special Service Tools Tool (Number and name) Illustration Use 09200-3N000 Engine support fixture (Beam) Removal and installation of the transaxle.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Compressor. Repair procedures

    Removal    Precautions for using the plastic pulley • Be careful not to place the pulley to downwards of the floor or table.

    Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0134