Hyundai Venue (QX): Hydraulic System / SS-A Solenoid Valve (ON/OFF). Description and operation
| Description |
| • |
SS-A solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears.
|
| • |
SS-A Solenoid valve(ON/OFF) is installed at valve body.
|
Inspection • Refer to the DTC manual for the check procedure.
Specifications ▷ Control type : Normally low type Shape Items Specifications Control current (voltage) [V] 9 - 16 Supply pressure [kpa (kgf/cm², psi)] 490.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Blower Resistor (Manual). Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Hyundai Venue (QX) (2020-2026) Service Manual: Description and operation
Description and Operation Blcok Diagram • This system monitors the driving situations through the radar and the camera. Thus, for a situation out of the sensing range, the system may not normally operate.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Repair procedures
- Rear Seat Assembly. Repair procedures
- Shift-lock system, Shift-lock release, Parking
- New on site
- Most important about car
