Hyundai Venue (QX): Hydraulic System / SS-A Solenoid Valve (ON/OFF). Specifications
| Specifications |
|
Shape |
Items |
Specifications |
|
|
Control current (voltage) [V] |
9 - 16 |
|
Supply pressure [kpa (kgf/cm², psi)] |
490.33 (5.0, 71.12) |
|
|
Control pressure [kpa (kgf/cm², psi)] |
0 - 490.33 (0 - 5.0, 0 - 71.12) |
|
| Internal
resistance(Ω) |
10 - 11 |
Description • SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears.
Component Location (1)_Valve Body Cover 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector Component Location (2)_Solenoid Valve 1.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: PTC Heater. Repair procedures
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Hyundai Venue (QX) (2020-2026) Service Manual: Intake Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Rear Seat Assembly. Repair procedures
- Automatic Transaxle Fluid (ATF). Repair procedures
- Electronic Stability Control (ESC)
- New on site
- Most important about car
