| Description |
| • |
Underdrive brake control solenoid valve(UD/B) is attached to the valve
body.
|
| • |
This variable force solenoid valve directly controls the hydraulic pressure
inside the underdrive brake.
|
Inspection • Refer to the DTC manual for the check procedure.
Specifications Shape Items Specifications Control current (voltage) [mA] 0 - 1100 Supply pressure [kpa (kgf/cm², psi)] 1569.
Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.