Hyundai Venue: Hydraulic System / SS-A Solenoid Valve (ON/OFF). Specifications

Hyundai Venue (QX) (2020-2025) Service Manual / Automatic Transaxle System / Hydraulic System / SS-A Solenoid Valve (ON/OFF). Specifications

Specifications

▷ Control type : Normally low type

Shape	Items	Specifications
	Control current (voltage) [V]	9 - 16
	Supply pressure [kpa (kgf/cm², psi)]	490.33 (5.0, 71.12)
	Control pressure [kpa (kgf/cm², psi)]	0 - 490.33 (0 - 5.0, 0 - 71.12)
	Internal resistance(Ω)	10 - 11

SS-A Solenoid Valve (ON/OFF). Description and operation

Description • SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears...

SS-A Solenoid Valve (ON/OFF). Components and components location

Component Location (1)_Valve Body Cover 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector Component Location (2)_Solenoid Valve 1...

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Rear Coil Spring. Repair procedures

Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from the rear hub. Tightening torque : 107...

Hyundai Venue (QX) (2020-2025) Service Manual: Driver Airbag (DAB) Module and Clock Spring. Description and operation

Description • Driver Air Bag (DAB) DAB is installed in the steering wheel, and electrically connected to the SRSCM via clock spring. It is deployed during frontal impact to protect the driver. • Clock Spring Clock spring delivers actuation signal, generated by the sensors installed in the front and right/left sides of a vehicle, to the inflator (gas generator) of the driver air bag module via internal cable...