Hyundai Venue (QX): Hydraulic System / SS-A Solenoid Valve (ON/OFF). Description and operation
| Description |
| • |
SS-A solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears.
|
| • |
SS-A Solenoid valve(ON/OFF) is installed at valve body.
|
Inspection • Refer to the DTC manual for the check procedure.
Specifications ▷ Control type : Normally low type Shape Items Specifications Control current (voltage) [V] 9 - 16 Supply pressure [kpa (kgf/cm², psi)] 490.
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Temperature Control Actuator. Description and operation
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.
Hyundai Venue (QX) (2020-2025) Service Manual: Description and operation
Description Rear view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the AV monitor or the ECM (Reverse Display Room Mirror) mirror while backing-up.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Repair procedures
- Components and components location
- Tire Pressure Monitoring System (TPMS) (Type A)
- New on site
- Most important about car
