Hyundai Venue (QX): Crash Pad / Steering Column Shroud Panel. Repair procedures

Hyundai Venue (QX) (2020-2025) Service Manual / Body (Interior and Exterior) / Crash Pad / Steering Column Shroud Panel. Repair procedures

Replacement
[Steering column shroud upper panel]
Hyundai Venue. Steering Column Shroud Panel. Repair procedures   
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the cluster fascia panel.
(Refer to Crash Pad - "Cluster Fascia Panel")
2.
Using a flat-tip screwdriver and remove the steering column shroud upper panel (A).

Hyundai Venue. Steering Column Shroud Panel. Repair procedures
3.
To install, reverse removal procedure.
[Steering column shroud lower panel]
Hyundai Venue. Steering Column Shroud Panel. Repair procedures   
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
2.
Loosen the mounting screws by turning the steering wheel to the left and right, and remove the steering column shroud lower panel (A).

Hyundai Venue. Steering Column Shroud Panel. Repair procedures
3.
To install, reverse removal procedure.

    Replacement    • Put on gloves to prevent hand injuries.

    Replacement    • Put on gloves to prevent hand injuries.

    Other information:

    Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures

    Refrigerant System Service Basics (R-134a) Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a(R-134a) from the air conditioning system.

    Hyundai Venue (QX) (2020-2025) Service Manual: Parking Distance Warning (PDW) Sensor. Repair procedures

    Removal 1. Remove the bumper cover. (Refer to Body - "Front Bumper Cover") 2. Disconnect the connector (A) from the PDW sensor. [L - Type] Installation 1.

    Categories

     
    Copyright © 2025 www.hvenueqx.com - 0.0106