Hyundai Venue: Hydraulic System / 26 Brake Control Solenoid Valve (26/B_VFS). Description and operation
• |
26 brake control solenoid valve(26/B_VFS) is attached to the valve body.
|
• |
This variable force solenoid valve directly controls the hydraulic pressure
inside the 26Brake.
|
Inspection
•
Refer to the DTC manual for the check procedure...
Specifications
Shape
Items
Specifications
Control current (voltage) [mA]
0 - 1100
Supply pressure [kpa (kgf/cm², psi)]
1569...
Other information:
The manual transmission has 6 forward gears. The transmission is fully synchronized
in all forward gears so shifting to either a higher or a lower gear can be easily
accomplished.
WARNING
Before leaving the driver's seat, always make sure the shift lever is in 1st
gear when the vehicle is parked on a uphill and in R (Reverse) on a downhill, set
the parking brake, and place the ignition switch in the LOCK/OFF position...
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the door trim.
(Refer to Body - "Front Door Trim")
3.
Disconnect the power door mirror connector (A) from the harness...
Categories
Your HYUNDAI uses a remote key, which you can use to lock or unlock the driver
and passenger doors or the rear liftgate.
(1) Door Lock
(2) Door Unlock
(3) Panic
Locking Your Vehicle
To lock your vehicle:
1. Make sure all doors, the engine hood and the liftgate are closed.
read more