Hyundai Venue: Ignition Lock Switch / Clutch Master Cylinder. Components and components location
Hyundai Venue (QX) (2020-2024) Service Manual / Clutch System / Ignition Lock Switch / Clutch Master Cylinder. Components and components location
| Components |
| 1. Clutch pedal assembly 2. Clutch pedal arm 3. Ignition lock & clutch switch |
4. Clutch master cylinder 5. Reservoir hose |
Clutch Tube. Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the air cleaner and air duct...
Clutch Master Cylinder. Repair procedures
Removal
1.
Separate the push rod (A) from the clutch pedal.
2.
Turn ignition switch OFF and disconnect the negative (-) battery cable...
Other information:
Hyundai Venue (QX) (2020-2024) Service Manual: Repair procedures
On-vehicle Inspection Inspect ignition coil assembly and Perform spark test 1. Check for DTCs. • If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC...
Hyundai Venue (QX) (2020-2024) Service Manual: Heater Unit. Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery / recycling / charging station. 3. When the engine is cool, drain the engine coolant from the radiator...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Operating Door Locks from Outside the Vehicle
- Smart Key
- Theft-Alarm System
- New on site
- Most important about car
Fuel gauge
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
The fuel tank capacity is given in chapter 2. The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty. On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
Copyright © 2024 www.hvenueqx.com