Hyundai Venue (QX): Ignition Lock Switch / Clutch Switch. Description and operation
| Description |
| – |
Clutch operation is detected through clutch switch signal. This signal
enables ECM to cope with instant change of load condition.
|
| – |
Clutch switch signal is used to detect engaged gear with vehicle speed
and engine speed.
|
| Ignition lock & clutch switch operating locus |
| – |
If the clutch pedal is pressed down, (A) operate ignition lock switch
at a location.
|
|||||||||||
Specifications Item Specifications Working voltage DC 12.5V ± 0.3V Operating force Initial position : 0.
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel.
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Heater & A/C Control Unit (DATC). Repair procedures
Self Diagnosis 1. Self-diagnosis process. • When operating the self-diagnostics, the below fault(self-diagnostics code) will blink at 0.
Hyundai Venue (QX) (2020-2025) Service Manual: Troubleshooting
Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surging" (repeated alternating acceleration and deceleration) occurs after setti
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Engine Mechanical System
- Repair procedures
- Child-Protector Rear Door Locks
- New on site
- Most important about car
