Hyundai Venue (QX): Ignition Lock Switch / Clutch Switch. Specifications
| Specifications |
|
Item |
Specifications |
|
Working voltage |
DC 12.5V ± 0.3V |
|
Operating force |
Initial position : 0.25 ± 0.15N(0.025 ± 0.015kg, 0.056 ± 0.034lb) |
|
Full position : 0.8 ± 0.2 N(0.08 ± 0.02 kgf, 0.180 ± 0.045 lb) |
|
|
Working temperature |
-40°C ~ 80°C (-104°F ~ 176°F) |
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel.
Description – Clutch operation is detected through clutch switch signal. This signal enables ECM to cope with instant change of load condition.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Blower Resistor (Manual). Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Hyundai Venue (QX) (2020-2026) Service Manual: Description and operation
Description Rear Corner Radar is a system that measures the relative speed and distance from the following vehicles by using two electromagnetic wave radar sensors attached to the rear bumper, and detects any vehicle within the blind spot zone and gives off alarm.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Lighting control
- Electronic Stability Control (ESC)
- Instrument Cluster
- New on site
- Most important about car
