Hyundai Venue: Indicators And Gauges / Description and operation
Cluster Variant Coding
As we have more options (ESC, TPMS, SCC, etc.) in the car, the dashboard now
have more information to display depending on the chosen options.
For this reason, we need to learn which options the current vehicle when we
replace the dashboard.
To address this issue, a course of learning based on the option required for
the vehicle when replacing the dashboard should be carried out.
This is called Variant Coding.
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel...
Other information:
Inspection
•
Refer to the DTC manual for the check procedure.
Removal
•
When the solenoid valve Diagnostic Trouble Codes (DTC) is on,
perform the following procedure to replace it...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect OCV connector.
3.
Measure resistance between OCV terminals 1 and 2.
4.
Check that the resistance is within the specification...
Categories
This warning light informs the driver the following situations.
-- Forward Collision-Avoidance Assist system malfunction (if equipped)
-- Forward Collision-Avoidance Assist radar blocked (if equipped)
-- Blind-Spot Collision Warning system malfunction (if equipped)
-- Blind-Spot Collision Warning radar blocked (if equipped)
-- Lamp malfunction (if equipped)
-- High Beam Assist malfunction (if equipped)
-- Tire Pressure Monitoring System (TPMS) malfunction (if equipped)
read more