Replacement 1. Remove the plug hole (A), loosen the mounting nuts and remove the wiper arm (B). Tightening torque : 22.
Components 1. Shift lever assembly. 2. Rear console mounting bracket 3. Rear console assembly 4. Front console assembly 5.
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.