Hyundai Venue: Front Seat / Front Seat Shield Outer Cover. Components and components location

1. Front seat shield outer cover
|
|
Replacement
1.
Loosen the front seat mounting bolts.
[Front]
Tightening torque :
49...
Replacement
•
Put on gloves to prevent hand injuries...
Other information:
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect IATS connector.
3.
Measure resistance between IATS terminals 3 and 4.
4.
Check that the resistance is within the specification...
Fail-safe Mode
Items
Fail-safe
ETC Motor
Throttle valve stuck at 5°
TPS
TPS 1 fault
Replace it with TPS2
TPS 2 fault
Replace it with TPS1
TPS 1, 2 fault
Throttle valve stuck at 5°
APS
APS 1 fault
Replace it with APS2
APS 2 fault
Replace it with APS1
APS 1, 2 fault
Throttle valve stuck at 5°
•
When throttle value is stuck at 5°, engine speed is limited
at below 1,500 rpm and vehicle speed at maximum 40 - 50 km/h
(25 - 31mph)...
Categories
Seat belt warning light (for driver’s seat)

As a reminder to the driver, the seat belt warning light will illuminate for
approximately 6 seconds each time you place the ignition switch to the ON position
regardless of belt fastening. However, if the seat belt is unfasted, a warning chime
will sound for approximately 6 seconds.
read more