Hyundai Venue: Engine Control System / Injector. Specifications
Hyundai Venue (QX) (2020-2025) Service Manual / Engine Control / Fuel System / Engine Control System / Injector. Specifications
| Specification |
|
Item |
Specification |
|
Coil Resistance (Ω) |
14.5 [20°C (68°F)] |
|
pin |
2 |
Injector. Description and operation
Description
Based on information from various sensors, the ECM can calculate the fuel amount
to be injected. The fuel injector is a solenoid-operated valve and the fuel
injection amount is controlled by length of injection time...
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Specifications
Specification Item Specification Power source 3V Operating temperature -10°C to +60°C (14°F to +140°F) RF Modulation FSK LF Modulation ASK RF frequency 433...
Hyundai Venue (QX) (2020-2025) Service Manual: Front Door Side Weatherstrip. Repair procedures
Replacement [Front door side weatherstrip] 1. Loosen the front door checker (B) mounting bolt. Tightening torque : 21.6 - 32.4 N.m (2.2 - 3.3 kgf.m,15.9 - 23.9 lb-ft) 2...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Rear Combination Light Bulb Replacement
- Shift-lock system, Shift-lock release, Parking
- Automatic Door Lock and Unlock Features
- New on site
- Most important about car
Master warning mode
This warning light informs the driver the following situations.
-- Forward Collision-Avoidance Assist system malfunction (if equipped)
-- Forward Collision-Avoidance Assist radar blocked (if equipped)
-- Blind-Spot Collision Warning system malfunction (if equipped)
-- Blind-Spot Collision Warning radar blocked (if equipped)
-- Lamp malfunction (if equipped)
-- High Beam Assist malfunction (if equipped)
-- Tire Pressure Monitoring System (TPMS) malfunction (if equipped)
Copyright © 2025 www.hvenueqx.com