Hyundai Venue (QX): Ignition Lock Switch / Clutch Master Cylinder. Components and components location
| Components |
| 1. Clutch pedal assembly 2. Clutch pedal arm 3. Ignition lock & clutch switch |
4. Clutch master cylinder 5. Reservoir hose |
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air cleaner and air duct.
Removal 1. Separate the push rod (A) from the clutch pedal. 2. Turn ignition switch OFF and disconnect the negative (-) battery cable.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Heater Unit. Components and components location
Component Location 1. Heater unit assembly Compoents 1. Mode control actuator 2. Heater core case 3. Center duct seal 4. PTC heater 5. Heater core assembly 6. Heater case [LH] 7.
Hyundai Venue (QX) (2020-2026) Service Manual: Rear Corner Radar Unit. Repair procedures
Removal lf replacement of the rear corner radar unit bracket or extension wire is required, replace the defective part only with a new one. 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- PTC Heater. Repair procedures
- Engine Coolant
- Operating Door Locks from Outside the Vehicle
- New on site
- Most important about car
