| Component Location |

| 1. ICU Junction Block
2. Rear glass defogger switch (Manual type) |
3. Rear glass defogger
switch (Auto type) 4. Rear glass defogger |
Inspection Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line.
Inspection • Before measuring the pressure of the refriferant line, check whether the refrigerant amount is charged in accordance with the specified charging amount.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.