Hyundai Venue (QX): Timing System / Drive Belt. Components and components location
| Components |
| 1. Drive belt |
Components 1. Timing Chain 2. Timing Chain Guide 3. Timing Chain Arm 4. Timing Chain Auto Tensioner 5. Timing Chain Cover 6.
Removal 1. Disconnect the battery negative terminal. 2. Loosen the mounting bolts (A) and then, turn the adjusting bolt (B) clockwise in loose tension.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: In-car Sensor. Description and operation
Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accord
Hyundai Venue (QX) (2020-2026) Service Manual: Blower Resistor (Manual). Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Rear Seat Assembly. Repair procedures
- Fuel Filler Door
- Rear Seats
- New on site
- Most important about car
