Hyundai Venue (QX): Hood / Hood Insulator Pad. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Body (Interior and Exterior) / Hood / Hood Insulator Pad. Repair procedures

Replacement
1.
Using a clip remover, remove the clips and then the hood insulator pad (A).
Hyundai Venue. Hood Insulator Pad. Repair procedures   
•
Be careful not to scratch the hood panel.

Hyundai Venue. Hood Insulator Pad. Repair procedures
2.
To install, reverse removal procedure.
Hyundai Venue. Hood Insulator Pad. Repair procedures   
•
Replace any damaged clips (or pin-type retainers).

    Replacement    • Be careful not to damage the hood and body.

    Replacement 1. Remove the hood weatherstrip (A).    • Be careful not to scratch the hood weatherstrip.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Evaporator Temperature Sensor. Description and operation

    Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0163